12 to 96 Cores Single Jacket ADSS Fiber Optic Cable

Oriental Fiber is delicate to manufacturing high quality ADSS fiber cables to distributors and fiber internet providers to reduce cost and grow business with Worry Free Solutions.

  • Top Rated ADSS Fiber Cable Manufacturer
  • 6 to 576 cores ADSS Cable for options
  • Single Jacket or Double Jackets for long distance Span
  • Trusted by big brands and Fiber Internet Service Providers
  • Free Sample Available for Testing
  • Short Lead Time for Bulk Order
  • 13 Fiber Cable Experts for your Customization


ADSS cable ( All Dilecric Self Supporting ) is aerial use Self-Supporting optical fiber cable with loose tubes stranded inside. Fibers, are positioned into a loose tube made of high modulus plastics.

The tubes are filled with a water-resistant Jelly. The tubes ( and fillers ) are stranded around a FRP ( Fiber Reinforced Plastic) as a non – metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. it is covered with thin PE ( polyethylene ) inner sheath.

After stranded layer of aramid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.


Comply with IEEE 1222, IEC 60794-4-20, ANSI/ICEA S-87-640, TELCORDIA GR-20, IEC 60793-1-22, IEC 60794-1-2, IEC 60794

Suitable Installation Type

  • Duct
  • Aerial
  • Direct Buried


• High voltage power lines
• Telephone poles
• Railway overhead lines
• Utilility networks
• Rural long distance data transmission

4 Reasons to Choose Oriental Fiber

Quality Material

Advanced Technology

High Test Standard

Always Fast Response


  • UV stabilised polyethelene jacket suitable for long life in a wide range of installations
  • Water swellable yarns provide protection again water ingress (dry core construction)
  • Non-metallic construction
  • Fibreglass reinforced polymer central strength member and aramid yarn peripheral strength member provide excellent strength
  • Flexible buffer tubes provide easy handle within termination enclosures
  • Single layer SZ stranding limits stress on fibre tubes
  • Fibre friendly thixotropic gel in tubes ensures fibre protection
  • TIA 598 standard colour code
  • 6 or 12 fibre tube constructions available (conditions may apply)
  • 6 to 288 fibres

Oriental Fiber Manufacturer

Make Fiber Cable Procurement Easy and Cost-effective

How to check more details about a fiber optic cable?


Number of fiber12-288 cores
Filling rope2-0
Moisture BarrierWater blocking system
Central strength membermaterialFRP/FRP with PE
Tube-fillingTube filling compound
fillerPP tube/ PVC tube
Inner sheathmaterialPE
Loose tubematerialPBT
Outer armoredmaterialAluminum tape/Corrugated steel tape
Outer sheathmaterialPE/HDPE

Fiber Characteristic

Fiber TypeOS1OM1OM2OM3OM4
Attenuation Coefficient (+20°C)@850nm/≤3.0 dB/km≤3.0 dB/km≤3.0 dB/km≤3.0 dB/km
@1300nm/≤1.5 dB/km≤1.5 dB/km≤1.5 dB/km≤1.5 dB/km
@1310nm≤0.36 dB/km////
@1500nm≤0.22 dB/km////
OFL Bandwidth@850nm/≥200 MHz · km≥500 MHz · km≥1500 MHz · km≥3500 MHz · km
@1300nm/≥500 MHz · km≥500 MHz · km≥500 MHz · km≥500 MHz · km
Numerical Value/0.275±0.015 NA0.200±0.015 NA0.200±0.015 NA0.200±0.015 NA
Cable Cut-off Wavelength≤1260 nm////

Structure Dimensions

Item ContentsValue G652.D
FibersNo. of Fibers12244896
Loose tubeNumber x Fibers per tube2×64×64×128×12
No. of Tubes (+Fillers)5558
Filling compoundThyrotrophic jelly compound
Material PBT (Polybutylene terephthalate)
(natural or white color)
Diameter (nominal)/mm2.00 2.00 2.30 2.30 
Thickness (nominal)/mm0.300.300.35 0.35 
Central Strength
FRP, Diameter (nominal)/mm1.
PE layer diameter (mm) 4.2
Water blocking
Material (cable core covering/filling)Water swellable yarn and Water blocking Tape
Additional Strength
MaterialAramid yarn
Ripcords MaterialPolyester cords or Plastic thread.
Color red
Inner Sheath
Material Black PE (Polythene)
Thickness (nominal)/mm Nominal: 0.8 mm
Outer Sheath
Material UV-Proof High density
black polyethylene
Thickness (nominal)/mm
Cable diameter (nominal)/mm9.8 10.211.0 13.4
Span (m)
Cable weightKg/km (nominal)94 ~ 101 94 ~ 101 119 ~ 127128~135
PackingWooden reel, 2.0km/reel±0.5%940*700940*7001040*6001040*600
Optical Cable Core1 Tube * 12 Core
Fiber ColorBlue, Orange, Green, Brown, Gray, White, Red, Black, Yellow, Purple, Pink, Aqua
Loose TubeDiameter2.0 ± 0.1mm
Strength MemberFRP2.0 ± 0.1mm * 2
Outer JacketMDPE (UV)1.7 ± 0.1mm
Permit SpanM80 M
Permit Wind SpeedKM/h20 KM/h
Permit Thickness of IceMM0 mm
Cable Nominal DiameterMM8.0 ± 0.3
Cable WeightKg/KM70 ± 5%
Bending RadiusStatic10 D
Dynamic20 D
Flattening ForceLong term200N/100mm
Short term500N/100mm


How Do We Pack Your Indoor / Outdoor Fiber Optical Cable?

Each single length of cable shall be reeled on wooden Drum suitable for long-distance shipment.

Indoor and FTTH drop cable are packed in small drum and packed in carton individually. Then cartons in one pallet.

Shipment & Lead Time

Packing Details1 to 5km per Roll. Packed by Steel Drum, or as per Request
Sheath MarkPrinting Content:
Supplier: Xuben or as customer required
Standard Code: (Product Type, Fiber Type, Fiber Count)
Year of manufacture: such as 2023
Length marking in each meter.
Dispatch PortShanghai, Guangzhou, Shenzhen, Ningbo or other Ports in China
Estimated Lead Time1 to 300km at 15 working days
301 to 500km at 25 working days
501 to 1,000km at 45 working days

Notice: The Packing standard and details as above is estimated and final size & weight shall be confirmed before shipment.


What is ADSS Fiber Cable?

All-Dielectric self supporting cable and single jacket designed for aerial installation. The optical fiber cable(ADSS) design provides no supporting part or messenger wire required.

Oriental Fiber provides for hardware part for installation with ADSS cable supporting on the pole. The cable inside multi-loose tube filled with a water resistant filling compound or design for waterblocked with water blocking material in side cable. The cable high tensile by aramid yarns and FRP strength member rod inside. Outer sheath made from HDPE. 

What is Technical Characteristics of ADSS Fiber Cable?

Due to the process innovation and technical breakthrough made on the basis of the conventional Single-mode fibre, FullBand ® low water peak Single-mode fibre has the following characteristics:

  • Designed for operation over the full optical spectrum from 1260-1625 nm, which provides 50% more usable wavelengths and hence the transmission capacity is increased
  • Outstanding optical performance supporting high-speed transmission technologies such as DWDM and CWDM
  • Being compatible with existing 1310 nm equipment
  • Good protection and excellent strip force stability
  • Accurate geometrical parameters that insure low splicing loss and high splicing efficiency

Quick Contact Form

You will often get our response in 6 hours or less.

    Factory Location:

    Building A, No.110, Ninghang North Road, Jurong City, Jiangsu, China.


    [email protected]
    [email protected]
    [email protected]

    24/7 Whatsapp:

    +86 186 8227 0997
    +86 131 8904 9416
    +86 138 1700 4898